top of page

Shure SM7B Specs



Frequency Response50 Hz - 20 kHz
Primary ApplicationsStudio Recording, Broadcast
Form FactorStand/Boom Mount
Dynamic Range (Typical)not specified by manufacturer
Signal-to-Noise RatioElectromagnetic Hum Sensitivity (Typical, Equivalent SPL/milliOersted)
60Hz: 11dB
500Hz: 24dB
1 kHz: 33dB
Intended Sound SourcesVocals, Speech/Voice Over
Maximum Input Sound Levelnot specified by manufacturer
Sound FieldMono
Power RequirementsNone Dynamic, Requires No Phantom or Battery Power
Output Impedance150 Ohms
Stereo/Surround ConfigurationCenter
Operating PrinciplePressure Operated
Output ConnectorsXLR-3M Type
ApplicationsBest for Voice Over (Broadcast Announcer) Work
Dimensions7.469 x 2.5" (189.7 x 96 mm) LxDiameter
Weight1 lb. 11 oz. (765.4 g)
Polar PatternCardioid
SpecialtiesLow Frequency Roll-Off: Bass Roll-Off and Mid-Range Emphasis Switch
OrientationEnd Address
High-Pass FilterYes
On-Board ControlsHF, High-Pass Filter
WindscreenFoam (Included)



Frequency Range50 Hz to 20 kHz
Impedance150 Ohms
Sensitivity-59 dBV/Pa at 1 kHz
Output Level-59 dB (1 kHz)



Output Connectors (Analog)1 x XLR 3-Pin Male (on Mic)



MountingMic Clip/Stand Adapter (with Included Hardware)
Mounting Thread Size5/8"-27 Female
Included CaseNone
Included FiltersNone
Construction MaterialAluminum, Steel
Dimensionsø: 2.5H: 5.9 x W: 7.8" / ø: 6.3H: 15 x W: 19.8 cm
Weight1.69 lb / 766.57 g

Shure SM7B Vocal Microphone

    No Reviews Yet